Green Solar New Energy Co. Ltd

Cooperator of GREEN SOLAR vacuum Ltd (Greece)
www.green-solar.net 
  • HOME
  • SERVICES
  • SOLAR PRODUCTS
    • Low pressure stainless inner tank >
      • YS - LSA
      • YS - LSB
      • YS - LSF (Flat Panel)
    • Low pressure porcelain enamel inner tank >
      • YS - LPA
      • YS - LPF (Flat Panel)
    • Compact & pressue stainless inner tank >
      • YS - CHS
      • YS - CHSF ( Flat Panel)
    • Compact & pressue porcelain enamel inner tank >
      • YS - CHP
      • YS - CHPF ( Flat Panel)
    • Pre-heating solar water heater >
      • YS - PHC
    • Split & Pressure Solar System with stainless inner tank >
      • YS - SPA (one copper coil )
      • YS - SPB (two copper coil )
    • Split & Pressure Solar System with porcelain enamel inner tank >
      • YS - SPPA (one copper coil )
      • YS - SPPB (two copper coil )
    • Heat Pipe solar collector >
      • Model : YS - HC
    • vacuum tube solar collector >
      • Model : YS - VCS (stainless manifold)
      • Model : YS - VCP (porcelain enamel manifold)
    • Flat panel solar collector >
      • Model : YS - FCB (Blue Tiox)
    • Solar project >
      • Solar pool heating system
      • Solar space heating system
      • Solar water heating for villa
      • others
  • APPLIANCE PRODUCTS
    • Water Filter >
      • REVERSE OSMOSIS
      • ULTRAFILTRATION (Model : UF-X)
      • ULTRAFILTRATION (Model : UF-3S)
      • ULTRAFILTRATION (Model : UF-4S)
      • ULTRAFILTRATION (Model : UF-5S)
      • ULTRAFILTRATION (Model : UF-6S/6X)
    • Home appliance products
  • Accessories
    • solar accessories
    • solar controller
  • DOWNLOADS
  • GALLERY
  • CONTACT US

Green solar products

Low pressure solar water heater
   + Stainless inner tank   
   + Porcelain enamel inner tank  

Compact & pressue solar water heater
    + Stainless inner  tank  
    + Porcelain enamel inner tank  

Pre-heating solar water heater
    + Stainless inner tank  

Split & Pressure Solar System
    +  Solar System with stainless inner tank
    +  Solar System with porcelain enamel tank

Solar collector
     + Heat Pipe solar collector  
     + Vacuum tube solar collector  
     + Flat panel solar collector  

Solar project
     + Solar pool heating system
     + Solar space heating system
     + Solar water heating for villa
     + Others

Accessories
     + solar water heater accessories
     + solar controller

Home Appliance Products    

     + Freezer
     + Fefrigerator
     + Air Condition
     + Dishwasher
     + Gas Water Heater

Contact Us :

Factory in China
Tel : 86-519-85256385
Fax : 86-519-85256385
Cell : 86-13861291747
Email : timsolar@vip.163.com  
            timsolar2012@gmail.com
Contact  : Mr.Tim Liu
Site : www.greensolarchina.com

Company in Greece
Tel : 30 2310 953421
Fax : 30 2310 953422
Cell : 30 6977 353638
Email : info@green-solar.net
Site: www.green-solar.net

  


 

Low pressure solar water heater


图片
      Model: YS - LSF
      Name: solar heater
      Type: low pressure
      OEM: welcome
      MOQ:1 set
      Lead time:15 days
      Brand: Green solar
      Payment: DP ,L/C ,T/T
      Price term: DDP ,CIF ,FOB


Simple Product Description

Model  :  YS-LSF
High pressure solar flat plate water heater
Solar flat plate collector : 2 ㎡ with Germany "TINOX" selective  
Solar tank: 150L ,200L pressure tank  
Bracket:Aluminium alloy material

Detailed Product Description

Model  :  YS-LSF
High pressure & compact solar Flat plate water heater with Aluminium alloy bracket
High pressure solar flat plate collector
1) Collector size :  2000X1000X80mm
2) Gross/Absorb area:  2 ㎡ / 1.85 ㎡
3) Nos of flowing tube :  9 pcs copper
4) Absorber Material :  copper
5) Welding :  ultrasonic welding
6) Absorber Coating :  blue sputtering titanium (Germany "TINOX" Selective )
7) Absorptance :  ≥95%±2%
8) Emission :  ≤4%±2%
9) Flowing tube :  9 Copper with 10 mm diameter ; thickness: 0.5 mm
10) Header tube :  2 Copper with 22 mm diameter ; thickness: 0.8 mm
11) Glazing :  3.2mm thickness High-transmission Low iron glass
12)GlassTransmittance :  light transmittance≥ 91%
13) Frame :  1.5 mm thickness Galvanized steel  
14) Insulation 50mm thickness high dense polyurethane foam & glass wool
15) Back sheet 0.5m thickness Embossed aluminum plate ; EPDM gasket
16) Fluid capacity 2.13L
17) Connections 22mm
18) Rated flowrate 100L/HR 26gallon/HR
19) Working pressure 0.6 MPa Test Pressure:1.2MPa
20) Package Pallet,Foam on panel corners and glass then carton
21) Quantity 140pcs/ 20FCL 290pcs/40HQ G.W45kg
22) Warranty time 3 Years  , life time:15 Years

High pressure solar tank & bracket

23) Tank volume 150L,200L
24) Outer tank Colored steel;thickness:0.4mm
25) Inner tank Stainless steel SUS 304-2B,thickness:0.4 mm
26) Foam: Polyurethane Foam,thickness:50mm
27) Solar accessories Mg anode,Electric heater,Relief valve
28) Brackets Aluminium alloy ;thickness:2.0mm


图片

We can install our solar heater with solar controller or auxiliary tank.
Installation with solar controller (SR500)
Installation with auxiliary tank
图片
Install with SR500
图片
Install with Auxiliary tank

Flat plate collector solar heater for you
 
Solar system are installed on the roof, typically facing South. when heated by the sun, rises up to circulate through the water tank, heating the water.
The system can act as a stand alone water heater, as the tank contains its own heating element, or the system can act as a non-electric pre-heater to a standard electric or gas water heater in the home. Savings in water heating cost exceed 90 percent in summer, saving over 20 percent of the typical electric bill. This system does not freeze, and corrosive water will not damage the collector copper tubes.
 
Advantage of flat plate collector solar heater :
 
1) Safe and steady
Solar collector uses all cooper fluid tube; System operating is steady; components are not easy to be damaged;
2.Pressurized operating
Working pressure is 0.6Mpa; designed pressure is 1.2Mpa; the hot water is forced to stream out from the top; it is convenient to use.

3.High heat efficiency
Absorbing coating of the collector is blue sputtering; absorbing rate is 93-97%, and emission rate is 2%-6%; heat efficiency is high

4.Good temperature preservation     
Thickness illustration layer is 50mm; constant temperature high pressure quantitative foam; less than 5 Celsius Degree per 24 H.
5. Several models fulfill different user need
According to customers’ requirement, we put our several modes with different specifications to suit flat, villa, hotel and factories. , etc

6.Easy installation
In order to suit different kinds of building construction, we search and produce several kinds of bracket construction, which are convenient to install and handsome appearance.  

7.Resist freeze
System has freeze resisting function which can be used in high latitude and cold area whether summer and winter.
Powered by Create your own unique website with customizable templates.